Custom Multifunction Power System - Your Power, Your Choice

Description

Build A Custom Multi-Power System

Everyone is different, encountering unique challenges on their jobsites requiring different equipment for different applications.

For those who want a truly customized multi-power solution, the VMAC Multifunction Power System can be ordered in numerous configurations. Each customized system will have the same overall size, with differences in overall weight.

Contact VMAC and let us guide you through the customization so you get the system that best works for you.

Your Power, Your Choice

1. Choose Your Power (choose between)

Air Compressor only
Air Compressor with AC Generator and DC Welder with Battery Booster/Charger

2. Choose Your Hydraulics (choose one)

No PTO
PTO Port only
PTO with 5 GPM @ 3,500 psi (max) Pump
PTO with 8 GPM @ 3,500 psi (max) Pump
PTO with 10 GPM @ 3,500 psi (max) Pump

3. Choose Your Fuel Supply (choose one)

None
Transfer Fuel Pump
7-Gallon Diesel Tank

4. Choose Your Factory-installed Options (choose any)

Cold Climate Kit
Terminal Strips only (on generator/welder)
Receptacles (on generator/welder)
Positive Air Shutoff System (PASS)

5. Choose Your Color (choose one)

Black
White (extended lead times apply)

Additional information

Dimensions	83.8 × 58.4 × 73.7 mm

Components

Air Compressor

Oil-injected rotary screw; belt-driven; 45 CFM @ 100 psi, 100% duty cycle; up to 175 psi

AC/DC Generator/Welder/Battery Charger/Booster

AC: 8 kW continuous output
- 1 x 30 A, 240V, 60 Hz three phase circuit (w/wo receptacles)
- 2 x 20 A, 120V, 60 Hz single phase circuit (w/wo receptacles)
DC: For battery boosting/charging; other DC loads
- Boost – 300 A max @ 13V; Charge – 100 A max @ 12V, 24V, 36V, 48V
- CC mode for SMAW and GTAW (stick/TIG welding)
- 250 A @ 35% duty cycle; 190 A @ 60% duty cycle

Generator/Welder Control Box

GENSET voltage meter & selector; welding current control and ARC force; socket for optional remote welding control

Kubota D902 Diesel Engine

Tier 4 Final, 3-cylinder, naturally aspirated 3,600 RPM

PTO Port

Clutched SAE ‘A’ port with 9-toothed spline, 2,800 RPM output; 35 lb-ft continuous torque max (patented)

Control/Digital Display Box

Remote mounted; electronic key switch; selector switches for PTO/GENSET/COMPRESSOR; LCD for compressor on/off controls, observing system status and adjusting parameters

Battery

Included ACDelco 12V, 460 CCA, 575 CA

Air/Oil Separator Tank

Separates compressor oil from compressed air

Positive Air Shutoff System (PASS)

Shocker PASS® automatically senses high-revving engines situations and closes the air supply to the engine

Cold Climate Kit For -40º

Cold Climate Protection is recommended if ambient temperatures frequently drop below -10ºC (14ºF); combine with an optional 1,750 W inverter to warm the system on the way to the job site

Specifications

Air Compressor Output

45 CFM @ 100 psi (175 psi max)

Air Compressor Type

Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw

Engine

Kubota D902 Diesel 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

Battery

ACDelco 12V, 460 CCA, 575 CA

Control System

Easy to use digital control system with adjustable parameters
Remote mounted generator/welder and compressor control panel
Any one function or all can be selected at any time
2-speed throttle control responds to air demand
Separate selector switches engage compressor, generator, and PTO
With compressor-only selected, and sustained periods of no air use, the control system will shut down the engine
Engine auto-restarts on air demand

Decibels (dB) @ 21 feet (6.4 meters)

81.2 dB at high idle, 76 dB at low idle, 0 dB in Standby Mode

Dimensions

33” (l) x 23” (w) x 29” (h); 83.8 cm (l) x 58.4 cm (w) x 73.7 cm (h)
Base footprint: 30” (l) x 20” (w); 76.2 cm (l) x 50.8 cm (w)

Cold Climate Protection

Engine and compressor will wait until the temperatures are above 41°F (5°C) before loading and going into a running state
Engine will automatically restart when system temperature falls below 23°F (-5°C)
Small heat strip included in LCD Digital Control Box
ESPAR heater connections; in/out ports for ESPAR heater integration (Oilman Series only)
Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates (AC/DC Generator/Welder models only)

Fuel Supply Options

7-gallon tank with fuel gauge and low fuel shut-off sensor
External Diesel Fuel Pump Kit

Warranty

Two years on all major components; VMAC air ends are covered by VMAC’s Lifetime Warranty (Limited)
Kubota diesel D902 engine covered by Kubota’s 2-Year warranty
For more information about VMAC’s warranty policies, visit www.vmacair.com/warranty

OPTIONAL COMPONENTS

AC/DC Generator/Welder

AC: 8 kW continuous output
- 1 x 30 A, 240V, 60 Hz three phase circuit (w/wo receptacles)
- 2 x 20 A, 120V, 60 Hz single phase circuit (w/wo receptacles)
DC: For battery boosting/charging; other DC loads
- Boost – 300 A max @ 13V; Charge – 100 A @ 12V, 24V, 36V, 48V
- CC mode for SMAW and GTAW (stick/TIG welding)
- 250 A @ 35% duty cycle; 190 A @ 60% duty cycle

Power Take-off Port

Clutched SAE ‘A’ port with 9-toothed spline, 2,800 RPM output, 35 lb-ft continuous torque max (patented)

Cold Climate Kit

Recommended if ambient temperatures frequently drop below -10ºC (14ºF)
Plugs into a 120V power source and the compressor and separator tank heaters will turn on
Optional 1,750 W power inverter allows cold climate kit to engage on the way to the job site

Hydraulic Pump

5 GPM @ 3,500 psi (max)
8 GPM @ 3,500 psi (max)
10 GPM @ 3,500 psi (max)
Or choose your own

Positive Air Shutoff System (PASS)

Shocker PASS® automatically senses high-revving engines situations and closes the air supply to the engine

Air Receiver Tank (recommended, not included)

Minimum 10-gallon air receiver tank recommended for proper operation of all functions

Downloads

Videos

VMAC Multifunction Power Systems: 6-in-1 Multi-Power Systems

You deserve the best multifunction power system to get the job done. VMAC Multifunction Power Systems are powered by Cat or Kubota engines and are lighter weight and more compact than the competition.

VMAC Multifunction Power System Capabilities

Wondering how a true multipower system works? Take a look at this video to learn about all six types of power offered on the VMAC Multifunction Power System.

Learn the VMAC Multifunction Control System

In this video tutorial, Darren of VMAC shows you how to use the VMAC Multifunction system. Learn about the Multifunction’s control system, find out how to customize your system, and discover the settings that will help you most of your Multifunction system.

VMAC 6-in-1 Multifunction Operational Training

Find out how to operate the VMAC Multifunction System in this operational training video. All VMAC Multifunctions have a similar operation, and this video features the 6-in-1 Oilman series with a Kubota engine.

VMAC Multifunction – Cat Power Demo

Yancey, a Cat Dealer with locations throughout Georgia, tests the crane functionality powered by the VMAC Multifunction – Cat Power.