Stacked Gas Powered Air Compressors

Description

VMAC’s stacked G30 gas powered air compressor is the best choice for fleet managers and owners who want the smallest possible footprint on their service truck, without compromising on power or performance.

Applications

Common jobs that use the compressor system:

Light/medium duty mobile mechanics
Mobile tire service technicians
Light duty contractors

Commonly used tools:

3/4” impact wrenches
Up to 1″ impact wrench with a small air receiver tank
Backfill tampers
2” Horizontal grinders
Chipping hammers
Die grinders
Tire inflation
Air wands/blow guns

Additional information

Weight	95 kg

Benefits

30 CFM, 100% Of The Time

VMAC G30 gas powered air compressors include a patented 30 CFM rotary screw air compressor designed to produce full air power, 100% of the time, so you don’t need an air receiver tank. Get jobs done faster, without interruption.

61% Smaller

The G30 was mindfully designed with one goal: to easily fit in modern service trucks. The stacked G30 is vertically designed, which significantly reduces the amount of vehicle space it requires, allowing it to fit either in the rear service body compartment or in the bed of a pickup truck. With a footprint of just 2.5 square feet, the stacked G30 is 61% smaller than competitive models.

59% Lighter

Stacked G30 gas powered air compressors are engineered and manufactured for mobile applications. Weighing less than 210 lb, the VMAC G30 is up to 59% lighter than typical 22-30 CFM reciprocating gas engine driven air compressors with a 30-gallon air receiver tank. Choosing a lightweight air compressor means you’ll be able to add more tools and equipment to your truck, carry more materials, or save money with better fuel economy.

Industry-leading Reliability

VMAC G30 gas powered air compressors are proven to work in extreme cold climates across North America when ordered with an optional, factory-installed cold climate kit. Engines supplied by Honda come with an industry-leading 3-year warranty and VMAC rotary screw air compressors come with the industry’s first Lifetime Warranty (Limited).

Components

Specifications

Air Compressor Output

30 CFM @ 100 psi (150 psi max)

Air Compressor Type

Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw

Engine

Honda GX390 air cooled 4-stroke OHV with electric start, CARB and EPA certified, Honda approved application.

Weight (wet)

Approximately 210 lb (95 kg)

Dimensions

20” (l) x 18” (w) x 38” (h); 50.8 cm (l) x 45.7 cm (w) x 96.5 cm (h)
Mounting Plate: 16.75” (l) x 10.75” (w); 42.5 cm (l) x 27.3 cm (w)

Throttle Control

2-speed throttle, responds to air demand

Battery (included)

ACDelco 12V, 460 CCA, 575 CA

Control System

Key switch, choke, hour meter
Automatically idles down/up with air demand
Unloader decreases engine load, lowers sound levels, reduces fuel use and engine wear

Safety System

Compressor thermal protection circuit
Automatic rapid blow-down valve on tank
200 psi pressure relief valve
Low engine oil pressure shutoff

Decibels (dB) @ 20 feet (6.1 meters)

81 dB at high idle; 67 dB at low idle

Fuel Tank Capacity

1.6-gallons (6.1 L)

Air Receiver Tank (recommended for high duty cycle applications in hot climates)

10-Gallon Air Receiver Tank w/ Mounting Feet
6-Gallon Air Receiver Wing Tank

Warranty

Two years on all major components; VMAC air ends are covered by VMAC’s Lifetime Warranty (Limited); Honda engine is covered by Honda’s 3-Year Warranty.

Downloads

Videos

VMAC Stacked G30: Rotary Screw Gas Driven Air Compressor With Vertical Design

Join Darren Darnley from VMAC, as he goes through the specs, components, safety features, warranty and accessories of the G30.

VMAC Training: G30 Gas Driven Air Compressors

Learn about VMAC’s G30 models, capabilities, and optional accessories in this gas driven air compressor training.

Stacked Gas Powered Air Compressors

Quick info